MICRO Mill FF 230 

The MICRO Mill FF 230 is a small, accurate milling system used to mill, drill and countersink steel, cast iron, aluminum, brass and plastic. The headstock swivels through 360°, indicated on a scale. Height is adjuling. One revolution equals 1/32" (1mm) travel, 1 division equals .002" (0,05mm). The quill and headstock may be locked in position, which is essential when milling. The powerful permanent magnet motor drives via a poly-v-belt, yielding high torques, especially at lower speeds.

The machine comes with three collets of 15/64", 5/16" and 25/64" (6, 8 and 10mm). The solid table has a size of 10 5/8" x 3 5/32" (270 x 80mm) and is T-slotted to 15/32" x 15/64" x 13/64" (the MICROMOT norm of 12 x 6 x 5mm).

Hand wheel serves as both height adjustment and fine mill feed.

Poly-V drive system offers 6 speeds between 280 and 2,200rpm.

The clamps and work piece shown are not included.

Hand wheels with zero adjustable scale, 1 rev = 1/16" (1.5mm), 1 division = .002" (0.05mm).

Technical data:
Volts 110 - 120V AC, 60Hz
Max. Power 1/8hp (100W)
Sanding Belt 16 - 38 ft./s (300 - 700m/min)
Sanding surface 2 23/64" x 1 37/64" (60 x 40mm)
Belt speed 525 ft/min (160m/min)
Weight 1.54 lbs (700g)