Authentication

Home :: TAIG L1015 Micro Lathe II Basic with Power Feed

TAIG L1015 Micro Lathe II Basic with Power Feed

TAIG L1015 Micro Lathe II Basic with Power Feed
 
Our price: $305.00
Weight 40.00 lbs
Quantity (8 available)   

Description
Ask a question about this product

TAIG L1015 Micro Lathe II Basic with Power Feed

Factory assembled with tool post and carriage depth stop, pulley set, mounting board and powerfeed gear box (tailstock not included) 15" bed.

The MicroLathe II is a machine you don't have to baby. It is a rugged and precision machine. The MicroLathe II has a machined, ground and stabilized steel bed. It has two sealed ball bearings in its spindle, coupled with a six speed positive vee belt drive. The spindle speeds are set in a geometric progression from 525 to 5200 RPM. A precision machine with the capabilities to 'HOG' 1/8 inch cuts in mild steel yet 'Dust' a few tenths, make the MicroLathe II a very versatile machine.

Some big lathe features include large 0.001 inch graduations on the cross slide dial, adjustable tool post and carriage depth stop. With adjustable brass gibs providing full compensation for carriage and cross slide wear, it all adds up to the BEST VALUE in small lathes!

Image depicts lathe with accessories price of lathe in picture $456.00 please see our lathe packages
Facebook Twitter and more

SPECIFICATIONS

GENERAL

  • Overall working accuracy 0.0005 in.
  • Max. headstock normality to bed 0.0004 in.
  • Max. taper bed dovetails over pins 0.0001 in.
  • Cross slide screw 1/4 - 20
  • Max. spindle speed recommended 7000 RPM
  • Length of headstock on ways 2.625 in.
  • Width of cross slide on carriage 2.000 in.
  • Maximum bearing runout 0.0004 in.
  • Max.cross slide normality to bed 0.0004 in.
  • Cross slide dial graduation 0.001 in.
  • Carriage travel 0.600 in. per 1 rev. of handwheel.
  • Pulley type std. 5/8 in. bore multi-stop vee belt.
  • Length of carriage on ways 3.000 in.
  • Bed dovetails 45 deg.

CAPACITY

  • Max. turning dia. 4.5 in. (extendable to 6.5 in.)
  • Swing over cross slide 2.375 in.
  • Overall length of bed 15.5 in.
  • Overall length of lathe 16.5 in.
  • Tool bit size standard 1/4 in.
  • Drill chuck capacity 1/4 in.
  • Distance between centers 9.75 in. (with tailstock).
  • Carriage travel 9.0 in.
  • Cross slide travel 1.75 in.

SPINDLE

  • Sealed precision ball bearing
  • Bearing OD 1.5748 in., ID 0.6692 in.
  • Spindle nose 3/4 in. - 16 (3/4 in. SAE)
  • Spindle hole 0.343 in.
  • Spindle ID taper 15 deg (30 deg included)
  • Max. collect diameter 9/32 in.
  • Pulley size 5/8 inch bore.





Part #

SRP

    Description

Part #

SRP

    Description
100-00 63.90     Complete Headstock 100-16 .75     Dial Brass Handle
100-01 24.90     Headstock Housing 100-17 5.60     Crosslide Screw
100-02 66.00     Ground Lathe Bed 100-18 .10     10-32 Hex Nut
100-03A 40.95     Spindle Assembly 100-19 .10     10-32 Set Screw
100-03 16.45     Spindle 100-20 3.95     Dial Bearing Block (includes bearing)
100-04 6.90     Bearing (2 required) 100-20E .20     Bearing Block Spacer
100-05 9.30     Bearing Spacer 100-22 3.90     Crosslide Dial
100-06 .75     threaded preload nut
100-07 .25     Thumb Screw 100-24 .75     Carriage Brass Handle
100-08 .55     Carriage Stop 100-25 2.65     Crosslide Screw Nut
100-09 12.00     Carriage Rack 100-26 19.35     Crosslide
100-10 .10     Rack 4-40 Screw 100-27 2.95     Crosslide Gib
100-11 31.00     Carriage 100-27A .10     Crosslide Gib 4-40 Screw
100-12 2.95     Carriage Gib 100-29 .20     10-32 x 1 3/4 Screw
100-12A .10     Carriage Gib 4-40 Screw 100-30 4.15     Tool Post Block
100-13A 4.00     Pinion Gear 100-32 .10     10-32 Square Nut
100-13B 1.45     Eccentric for Pinion Gear 100-33 ..10     10-32 Screw
100-14 .20     Retainer Clip 100-34 .25     Thumb Screw
100-15 2.85     Carriage Hand Wheel

Product rating

Sign in to rate

Reviews

There have been no reviews for this product.

Categories

Search

Manufacturers

Shop by Manufacturer


Bestsellers