Home // Dji Naza + GPS + Flamewheel F550 ARF Hex Rotor RC Helicopter Combo Kits

Dji Naza + GPS + Flamewheel F550 ARF Hex Rotor RC Helicopter Combo Kits

Dji Naza + GPS + Flamewheel F550 ARF Hex Rotor RC Helicopter Combo Kits
Our price: $695.50
Weight 12.00 lbs
Market price: $717.00
Quantity (10 available)   
Kit Options


Dji Naza + GPS + Flamewheel F550 ARF Hex Rotor RC Helicopter Combo Kits


  • Combo Kit or
  • Combo Kit w/o GPS
  • Combo Kit w/o Controller & GPS
  • Flame Wheel Only

Combo Kit Includes

(1x) DJI Flame Wheel F550 Hex-Rotor RC Heli Kit

Flame Wheel 550 is a multi-rotor designed for all pilots for entertaining or amateur AP. With DJI WooKong-M or NAZA autopilot system, such actions as hovering, cruising, even rolling and other maneuvers can be achieved. It can be applied to entertainment, aerial photography, FPV and other aeromodelling activities.


  • Ultra-Strength Material
  • Integrated PCB Wiring
  • Huge Assemble Space
  • Gorgeous Frame Arms


  • Frame Weight: 478g
  • Diagonal Wheelbase: 550mm
  • Takeoff Weight: 1200g - 2400g
  • Recommended Propeller: 10 x 4.5in; 8 x 4.5in
  • Recommended Battery: 3S-4S Li-Po (Not Included)
  • Recommended Motor: 22 × 12mm (Stator size) (Not Included)
  • Recommended ESC: 30A OPTO (Not Included)

(4x) DJI 2212 Electric Motor


  • Stator size: 22x12mm
  • KV: 920 rpm/V

(4x) DJI ESC 30A


  • Current: 30A OPTO
  • Signal Frequency: 30Hz - 450Hz
  • Battery Required: 3S - 4S Li-Po

(6x) DJI 10" Propellers

  • Adopt PC/ABS ultrastrength material design, fine surface hardness, anti-impact.
  • Dimensions: 10 x 4.5 in

(1x) DJI NAZA Multirotor Controller which Includes DJI BEC


  • All-in-one Design
  • Advanced Attitude stabiliza Algorithm
  • Multiple Flight Control Mode / Intelligent Switching
  • GPS Module Available / Accurate Position Hold
  • Intelligent Orientation Control
  • FailSafe Mode
  • Two Levels Low Voltage Protections
  • Motor Arm
  • Motor Disarm
  • Supporting Futaba S-Bus Receiver
  • 6 Type of Multi-Rotors
  • Built-In Gimbal Stabilization Function
  • Remote Adjustment and Firmware Online Update


(1x) DJI NAZA Gps

This is the GPS upgrade unit for the DJI NAZA R/C helicopters and controller.


  • RTH (Return-To-Home)
  • IOC (Intelligent Orientation Control)
  • Low Battery Warning



Supported Multi-rotor Quad-rotor I4, X4 / Hex-rotor I6, X6, IY6, Y6
Supported ESC output 400Hz refresh frequency.
Recommended Transmitter PCM or 2.4GHz with minimum 4 channels.
Working Voltage Range
  • MC: 4.8V-5.5V
  • VU: 7.2V - 26.0 V (recommend 2S - 6S LiPo)
Power Consumption
  • MAX 1.5W (0.3A@5V)
  • Normal: 0.6W (0.12A@5V)
Operating Temperature -10°C - 50°C
Assistant Software System Requirement Windows XP SP3 / 7
Max Yaw Angular Velocity 200°/s
Max Tilt Angle 45°
Ascent / Descent ±6m/s
  • MC:25g
  • VU:20g
  • GPS:21.3g
  • MC: 45.5mm x 31.5mm x 18.5mm
  • VU: 32.2mm x 21.1mm x 7.7mm
  • GPS & Compass 46mm(diameter)x9mm
Built-In Functions
  • Three Modes Autopilot
  • Enhanced Fail-safe
  • Low Voltage Protection
  • S-Bus Receiver Support
  • 2-axle Gimbal Support
Packaging List
  • Naza Multi-Rotor Controller x 1
  • Dji BEC (DJIBEC) x 1
  • USB Cable x 1
  • 3-PIN Servo Cable x 8
  • Double sided tape x 2



Get your DJI Flame Wheel 550 Pro right here on VCS Hobbies!

DJI Innovations: Flame Wheel 550 Pro – The Perfect Aerial Platform for the Weekend Photographer or Videographer

The word “drone” has dominated the news, so it’s no wonder that we RC modelers like the idea of having our won RC drone.  Add a camera to that and you have something that is going to be a blast to fly and to review photos or videos taken while flying. One company has realized this very early on and has quickly become the leader in multi-rotor copters- DJI Innovations has four and six-motor copters that range from beginner (out of the box and ready to fly) to expert (able to lift a very large payload) levels.


The Flame Wheel 550 with the Naza-M GPS package, six APC 10x4.7 SFP props, six powerful motors, two servos, and an Gimbal System is what you will need to unleash this heli's prowess. You will need to buy the motorspropellersbatteryreceiverNaza autopilot , Gimbal System and transmitter to build a model that is ready to fly.  The assembly can easily be done by anyone with any type of RC experience, and the Naza system makes this as easy bird to fly.  Any novice RC pilot would have no problem with this aircraft.

Unique Features

Assembly on the Flame Wheel 550 starts by soldering the ESC power wires to the bottom board.  There are positive and negative patches that are clearly marked on the board and make it easy to solder all six ESCs to the proper location.  02Now the battery plug and VU module are soldered to the bottom board and that’s it for soldering.  I mounted on the prop shaft to the top of the motor and then mounted all six motors to the arms.  First, I laid out the arms and decided which way would be the front of the Flame Wheel, so that the two red arms could face forward.  The deciding factor for me was the location where I wanted the battery plug; I decided to have it at the back of the copter.  Then I bolted all six arms onto the bottom board and threaded the ESC wires through the openings on the arms.

Now, the Naza, main controller is placed in the proper orientation so that the front of it is facing forward and each of the plugs for the ESC are plugged into it.  At this time, I also plugged in the VU module, the GPS/compass unit, and three short servo extensions, one for the receiver and two for the camera gimbal servos.  I mounted the Naza main controller on the center of the bottom board with double-sided tape.  All of the wires were tied down neatly and the top cover was bolted into place. The GPS/compass unit was mounted on the top in the proper direction with the little tower setup included with the GPS; again the wires were neatly tied down using a cable tie.  The last thing I needed to add was the receiver, which was attached using double sided tape.  The single S.Bus plug makes connecting the Naza main controller to the receiver a snap.


My focus now turns to assembling the Camera Gimbal System, which is also a large landing gear for the Flame Wheel.  The assembly is straightforward.  The key point is to make sure the servos are centered before mounting them in the camera cradle- this just makes final adjustments a little easier.  The completed assembly is now mounted to the bottom of the Flame Wheel using the included bolts and washers.


The Flame Wheel 550 assembly can be done in just a few evenings if you have just a few constructions projects like this under your belt; otherwise, just add a couple more evenings and it will be complete.  I would recommend getting the receiver-ready kits, a camera Gimbal System.  This way, everything except the receiver and battery is included, so you can get into the air quickly.  This is when the fun will really start!

Order your own DJI Flame Wheel F550 Pro right here!

Product rating

Sign in to rate


There have been no reviews for this product.