Sherline RH 80 Degree Carbide Insert Holder, 3/8 inch shank 2253

$66.70

Sherline RH 80 Degree Carbide Insert Holder, 3/8 inch shank 2253

SKU: sher-2253 Category: Tag:

Description

Sherline RH 80 Degree Carbide Insert Holder, 3/8 inch shank 2253

80 degree Carbide inserts have a strong shape that is generally used for roughing a part to near finished size quickly. This holder is offset 35 deg. to the side for cutting from left to right (the chip comes off to the right side). It is made from steel and case hardened and given a black oxide finish. Included is a P/N 7608 80 deg. carbide insert, Torx hold-down screw and Torx key. A left-hand holder is available as P/N 2254 or you can buy the pair of holders as P/N 2255 at a substantial savings in price compared to buying the two tools separately.

The 3/8″ shank can be held in a P/N 7600 standard height 3/8″ tool post or the P/N 1289 riser 3/8″ tool post. For those who prefer the 2250 quick-change tool post, there is now a P/N 2282 quick-change holder for 3/8″ shank tools as well.

About the Insert Holders

Sherline now manufactures its own inserted tip carbide tool holders. They are available with 80-degree inserts individually as a right-hand holder and a left-hand holder or as a pair. Each comes with an 80 degree carbide insert, hold-down screw and special Torx key. The 3/8″ square shank is held in a 3/8″ insert tool post. The 5° offset angle of the tip makes it easier to accomplish certain cuts. For example, by using the tool holder square with the crosslide, you can turn an O.D. up to a shoulder and then finish the shoulder by backing the tool out while still maintaining the proper tool clearance. The tip of the cutting tool is .375″ from the bottom of the holder, which is the industry standard.

The holders are made from case hardened steel with a black oxide finish. The 80° inserts are generally used for roughing cuts. Holders with 55° inserts are also available.

Cutting Edges

Though relatively expensive, if a cutting edge becomes dull or chipped, the insert can be removed and rotated 180° to expose two new cutting surfaces, providing, in effect, two tools for the price of one.

The primary method of cutting metal on miniature machine tools is usually with high-speed steel tools as they are inexpensive, easily resharpened and can be ground into “form” tools for special jobs. However, inserted tip carbide tools can be lifesavers for some jobs. Though more expensive and not able to be resharpened, carbide tools hold their cutting edge when cutting exotic metals or abrasive materials and can speed up the cutting process. This is why they are used for most cutting tasks in the modern professional machine shop.

NOTE: A tool is named by the direction from which the chip leaves the tool; so a right-hand tool has its cutting edge on the left and the chip peels off to the right.

Additional information

Weight 0.50 lbs
Dimensions 6 × 5 × 6 in

You may also like…