Sherline 9/16 (inch) Headstock Assembly 30110

$185.64

Sherline 9/16 (inch) Headstock Assembly 30110

Description

Sherline 9/16 (inch) Headstock Assembly 30110

Sherline 9/16 (inch) Headstock Assembly 30110

We opened the spindle through-hole to a maximum of 9/16″ (14.28 mm). While this allows larger stock to pass through the headstock.

It also eliminates the #1 Morse internal taper, meaning tapered tools like drill chucks, fly cutters, etc., cannot be held in the headstock.

Threaded tools can still be used, such as 3 or 4-jaw chucks and end mill holders.

The headstock includes a spindle pulley and a precision ground head key.

NOTE: Certain attachments, like the Thread Cutting Attachment, the Lathe Power Feed, and the 10,000 RPM Pulley Set will NOT work with the 9/16″ Collet Headstock. If you are uncertain if an accessory will work with the 9/16″ Collet Headstock, please call for more information.

Custom Build Your 9/16″ Through-Hole Spindle Headstock with the Following Options:

  • Class 3 or Class 5 Bearings
  • With or without a DC Motor and Speed Control Unit

NOTE: The 9/16″ spindles DO NOT have electroless nickel plating as an available option

The bearings in the headstocks are offered in two classes: C3 and C5.

The C3 bearings have been the standard in all of our headstocks for years and have proven reliable over that time.

The C5 bearing headstocks come at a higher price than the standard C3 bearings headstocks, but they run smoother, quieter, and cooler than our regular class 3 bearing headstocks and are more suitable in an industrial setting.

Additional information

Weight 1 lbs
Dimensions 8 × 4 × 4 in

You may also like…