Sherline CNC Ready Lathe A Package 4400A-CNC

$1,076.40

Sherline 17 Inch CNC Ready Lathe Package A 4400A-CNC

Description

Sherline CNC Ready Lathe A Package 4400A-CNC

CNC Ready Lathe A Package 4400A-CNC

If you have an interest in a lathe with more distance between centers, the model 4400 (metric 4410) lathe is available. Several upgrades are part of the purchase price. Standard equipment is the same as on the model 4000. Includes a 90 VDC motor with electronic speed controller, a 2.75″ (70mm) x 6.0″ (152mm) crosslide, pulleys, belt and faceplate. Also a lathe dog, two dead centers, three hexagonal keys, sharpened high-speed steel cutting tool, eight-foot, three-wire power cord and instruction booklet.

In addition, the model 4400 lathe has a 24″ (610mm) bed. It has 17″ (431mm) between centers and 2.5″ (63mm) resettable “zero” handwheel on the leadscrew. Additionally it has two 2″ (51mm) resettable “zero” handwheels on the crosslide and feed screw and a rocker tool post (P/N 3057). This was substituted for the standard tool post used on the shortbed lathes.

The electronic speed control allows continuously variable speed control from 70 to 2800 RPM without belt changes. There is a second pulley position available that offers extra torque at low RPM if needed. Many machinists find that the extra space between centers comes in handy when working with a part held in a chuck and a larger tailstock chuck with a long drill bit in place.

The combination of chucks, part and drill can eat up a lot of the available center-to-center distance, and a little extra capacity is often appreciated. This lathe offers the same diameter turning capacities as the shorter lathe and same powerful motor/speed control.

The differences are both the extra 9” of center distance and the addition of extras like the adjustable zero handwheels and rocker toolpost, making this lathe a good value for the extra cost.

Package Includes:

  • Everything in the “A” Package PLUS CNC Motor Mounts:
  • 3.1″ 3-jaw Chuck
  • 3/8″ Tailstock Chuck
  • CNC Stepper Motor Mounts Installed

Note that CNC-ready machines cannot operate manually until you install the stepper motors

**PLEASE NOTE CNC READY MACHINES DO NOT INCLUDE COMPUTER, STEPPER MOTORS OR CONTROLLER. YOU CAN PURCHASE THEM SEPARATELY.*

Additional information

Weight 34 lbs
Dimensions 38 × 16 × 16 in

You may also like…