Sherline 1010 – 5/32 Inch Drill Chuck with #1 Morse Arbor

$76.44

Sherline 1010 – 5/32 Inch Drill Chuck with #1 Morse Arbor

Description

Sherline 1010 – 5/32 Inch Drill Chuck with #1 Morse Arbor

Sherline’s drill chucks are available in 5/32″, 1/4″ and 3/8″ sizes. Runout is .003″ or less. If runout of less than this amount is required, collets should be used to hole the drill rather than a chuck.

The 5/32″ chuck holds drills from 5/32″ (4mm) down to #80 (.0135″ or .343mm). We have pressed a special arbor that provides either a #1 Morse taper to fit into the Sherline headstock (P/N 1010) or a #0 Morse taper to fit the tailstock (See P/N 1015). A chuck key plus a drawbolt and washer are included with P/N 1010 to secure the chuck in position.

These chucks are useful for holding very small drills and their shorter length provides an increase of about 1/2″ in working space between centers compared to the 1/4″ drill chuck.

Additional information

Weight 3 lbs
Dimensions 4 × 2 × 4 in