Sherline Clockmaker’s Gearcutting Arbor 2096

$65.52

Sherline Clockmaker’s Gearcutting Arbor 2096

Description

Sherline Clockmaker’s Gearcutting Arbor 2096

The clockmaker’s gearcutting arbor is primarily designed to be used on watchmaker’s lathes that accept 8.0 mm or 10.0 mm “D” collets. The P/N 2094 Gearcutting Arbor (sold separately) with its #1 Morse taper is designed for use on your Sherline Lathe.

These arbors are not designed to be used on Sherline lathes.  Rather, they are specifically suited to the types of lathes often used by jewelers and watch makers. Though highly accurate, these machines are often not very versatile.

The 2096 arbors have a removable bushing that allows them to accommodate geartooth cutters with two different center hole sizes. Clockmaker’s gearcutting arbor 7 mm to 8 mm WW Collet

With use of a P/N 1156 8mm Adapter, the P/N 2096 8mm arbor can also be used on Sherline lathes, although the normal system for mounting chucks is recommended.

Additional information

Weight 0.50 lbs
Dimensions 2 × 2 × 2 in