Sherline 3306 – Headstock, DC Motor, and Speed Control Assembly (2800 RPM)

$352.80

Sherline 3306 Headstock, DC Motor, and Speed Control Assembly (2800 RPM)

Description

Sherline 3306 – Headstock, DC Motor, and Speed Control Assembly (2800 RPM)

ELECTRIC MOTOR SPECIFICATIONS FROM MANUFACTURER

• Type of enclosure: Totally enclosed, non-vented

• Duty rating: Continuous–10 oz. in. at 6100 rpm, .85 amperes; Intermittent–30 oz. in. at 5500 rpm, 1.75 amperes (5 minutes on / 15 minutes off)

• Output horsepower: .06 KW (60 W) at 10 oz. in. / 6100 rpm

• AC voltage (input): Normally 115 VAC, 60 Hz, Single Phase to rectifier (Sherline electronic speed control converts any input from 100 VAC to 240 VAC, 50-60 Hz.)

• DC voltage: 90 VDC to motor (60 Hz)

• Speed in rpm: 6100 rpm continuous

• Class of insulation: Class A, 105° (C.) insulation system

• Normal full load current: .85 amperes

• Starting current: 17 amperes instantaneous starting current (<100 milliamperes). This is also stall current in True RMS

• Max current at time of changeover from lower speed to higher speed: Depends on load

• Type of motor: 3.00 inch (outer diameter) sub-fractional horsepower brush-type permanent magnet motor

• Temperature rise at ambient 50° C.: Less than or equal to 45° C.

• Motor frame size: 3 inches

• End use of motor: Drive unit for lathe or mill

 

Additional information

Weight 15 lbs
Dimensions 10 × 6 × 12 in