Sherline Z-Axis CNC-Ready Upgrade Kit for 2000 Mill 6750


Sherline Z-Axis CNC-Ready Upgrade Kit for 2000 Mill 6750


Sherline Z-Axis CNC-Ready Upgrade Kit for 2000 Mill 6750

Z-Axis CNC-Ready Upgrade for the Sherline 2000 Mill. This kit will upgrade both the inch and metric mill versions.

About the Sherline CNC-Ready Conversion Kits

Any existing Sherline lathe or mill can be converted to CNC-ready status. The installation will involve drilling and tapping several holes to attach the stepper motor mounts.

The kits include drill blocks that are attached to the appropriate table or bed using the single existing hole and then two new holes are drilled using the block as a guide. The holes are then tapped and the new mount installed. In the case of the mill column and the lathe leadscrew, a new leadscrew must also be installed. Complete instructions for the conversion are supplied with the kits.

The 6750/6755 CNC-Ready Mill Upgrade Kit

The 6750 (6755 metric) is designed for the 2000-series mills, which includes the following:

  • 1 stepper motor mount
  • CNC Model 2000 Z-axis Screw
  • CNC-RH Coupling Preload Nut
  • CNC Template, Bed Bushing
  • All the nuts and screws for motor mount attachment
  • Conversion and assembly instructions

What does “CNC-Ready” mean?

CNC-ready means the machine is ready to bolt on stepper motors and apply CNC control to them by means of a system that the user must supply. If you are not capable of developing your own CNC system, several aftermarket suppliers offer stepper motors, drivers and CNC software to complete the system.

UPGRADE NOTICE: If you are converting a manual mill to CNC, you will also need to purchase the Mill CNC Z-Axis Backlash Adjustment Kit (sold separately). Also please note. Any new Sherline machine can also be ordered from the factory with stepper motor mounts already installed. Please contact us for more information. You may also browse through our website for specs and pricing details.

Additional information

Weight 8 lbs
Dimensions 6 × 6 × 6 in