Rokuhan Controller Automated Switch Back C006

$42.95

Rokuhan Controller Automated Switch Back C006

Description

Rokuhan Controller Automated Switch Back C006

Allows automated train control between two points. Trains slow automatically, then reverse and continue to the other end point. RC02 or RC03 required to power the track section. For Rokuhan Z scale trains.

Contents

  • C006 with one power plug 1 piece
  • Photo sensor switch 2 pieces
  • A008 feeder cable 1 piece
  • Instruction manual 1 piece
  1. Operate C006 with RC03 or RC02.
  2. Connect power plug from C006 into RC03/RC02.
  3. Set 2 photo sensor cables into C006 pin jack and set A008 feeder cable in socket.
  4. Set 2 photo sensor switch into 2 straight tracks like A008 feeder cable.
  5. Set A008 feeder cable plug into another straight trackĀ  which is set between 2 photo sensor switch tracks.
  6. You can set curve tracks also between photo sensor switch tracks if necessary.

Additional information

Weight 0.50 lbs
Dimensions 6 × 6 × 6 in

You may also like…