Description
Sherline 1204 – Adjustable Tailstock 5/32 in 0JT Chuck Arbor
Much like the Adjustable Live Center, holding a tailstock chuck
in perfect alignment without some method of adjusting it can be
difficult or impossible. The adjustment screws and split design
allow perfect centering for the chuck. With the tiny drills that
can be held in a 5/32″ chuck this is even more critical than with
the 1/4″ or 3/8″ chucks. The 5/32″ Jacobs drill chuck is pressed
onto a tapered protrusion on the front plate of the holder. The
rear plate of the holder has the #0 Morse taper that goes in the
tailstock. Two slightly oversize holes in the rear plate allow
adjustment screws to be loosened, the center located and then
locked down where you want it. In this manner, highly accurate
centering can be achieved. If the ultimate in accuracy is your
goal, the Adjustable Tailstock Chuck Holder will help you achieve
it.
